Advertisement
Mounting Instructions EVM-4, EVM-6, EVM-8, EVM-10
Dismantling/Disposal
Dismantling
11.1
Dismantling may only be performed by skilled personnel. Make sure the shut down procedure
is followed before beginning dismantling work.
Disposal
11.2
The machine is primarily made of copper (except for the electrical
equipment) and must be disposed of in accordance with local environmental
protection regulations. Oil and cleaning materials must be disposed of in
accordance with the local laws and the instructions given in the material
safety data sheets. Contaminated cleaning tools (brushes, cloths, etc.) must
also be disposed of in accordance with the manufacturer's instructions.
Version 1.3.19
page 63/64
Ferrotec GmbH
Advertisement
