Advertisement
Mounting Instructions EVM-4, EVM-6, EVM-8, EVM-10
Outlet housing
R ü c k l a u f G e h ä u s e
(Magnet)
Fig. 8 Cooling water connection
5.5.2.3
Magnet current cable
Connect the magnet current feedthrough to the magnet current socket on the evaporator
with the help of the magnet current cable from the tool kit. The maximum current needed is
± 3 A.
Fig. 9 Connecting diagram for magnet current drive
Version 1.3.19
To avoid damage to the evaporator, it is more important to
guarantee an adequate flow of water than to worry about the
temperature of the cooling water in the outlet. Slight warm
water (max. 40°C) does not damage the evaporator.
Inlet Housing (10 mm OD or 8 mm OD tubing)
V o r l a u f G e h ä u s e
(Magnet)
page 32/64
NOTICE
Outlet crucible
R ü c k l a u f T i e g e l
V o r l a u f T i e g e l
Inlet crucible
1 0 m m O D o d e r 8 m m O D
S c h l a u c h a n s c h l u s s
Ferrotec GmbH
Advertisement
