Advertisement
Mounting Instructions EVM-4, EVM-6, EVM-8, EVM-10
Check the shipment itself for damage (visual inspection)!
•
Complaints
If the shipment was damaged during transit:
Immediately contact the last carrier!
•
Keep the packaging material (for possible inspection or return shipment)
•
5.2.2 Intermediate storage
The freight packaging of the electron beam evaporator and spare and replacement parts is
designed for a storage period of three months from delivery.
Storage conditions
Closed and dry room with a room temperature of +5°C...+40°C, non-condensing humidity at
max. 80% relative humidity.
Transportation to the point of installation (by operator)
5.3
Weight (total)
With dismounted crucible and drive, the individual weights are below 15 kg.
Version 1.3.19
The transportation may only be done by trained personnel
according local conditions and by following the instruction
given on the outside of the packaging.
Take the weight of the transport unit into account during
transport (see technical specifications). The transport unit can
tip over during transport. Pay attention to the centre of
gravity
EVM-4
9 kg
Pay attention to the dangers from magnetism when using
and handling the electron beam evaporator. People with
cardiac pacemakers (and with insulin pumps and people with
active or passive prostheses and ferromagnetic or conductive
foreign bodies) may not be used to transport and install the
electron beam evaporator.
page 25/64
NOTICE
WARNING
EVM-6
EVM-8
12 kg
15 kg
DANGER
EVM-10
30 kg
Ferrotec GmbH
Advertisement
