Table of Contents
Advertisement
CombiFlash NextGen Systems
Section 2 Preparation
2.7 Vapor Enclosure
(Optional)
Figure 2-8 Location of holes for the vapor enclosure
Figure 2-9 Location of the external exhaust port
2-10
Discontinue use of the CombiFlash NextGen system if liquid is
present at the Pump Drain. Contact Teledyne ISCO technical
service for assistance with correcting the leak.
1. Secure the Vapor Enclosure with the three provided screws
to the holes in the instrument (Figure 2-8). Two along the
back of the fraction collection area and one on the side of
the fraction collection area.
2. The back of the unit has a 2" O.D. port for attachment to an
external exhaust (Figure 2-9). The external exhaust should meet
the specifications of your environmental, health, and safety spec-
ifications.
EAR99 Technology Technology Subject to Restrictions Contained on the Cover Page
CAUTION
Advertisement
Table of Contents
