Teledyne CombiFlash NextGen Installation And Operation Manual page 12

Table of Contents

CombiFlash NextGen Systems

Section 1 Introduction

Figure 1-1 CombiFlash NextGen 100 with 12 inch display, 1-100 mL/min, 150 psi (without solid

load injection valve)

1-2

The CombiFlash NextGen systems are available in three configu-

rations: NextGen 100, NextGen 300, and NextGen 300+.

CombiFlash NextGen 100 – For general purpose Flash chro-

matography needs, this configuration delivers flow rates from

1 to 100 mL/min, with a maximum pressure limit of 150 psi. The

system delivers solvent gradients formed from the 2 solvent inlet

lines. This configuration has an easily accessible fluid path that

supports liquid sample introduction, and a variable wavelength

PDA UV detector with optional UV-vis, Evaporative Light Scat-

tering Detection (ELSD) or PurIon Mass Spectrometer detection.

EAR99 Technology Technology Subject to Restrictions Contained on the Cover Page

Table of Contents

Combiflash nextgen 100 Combiflash nextgen 300