Table of Contents
Advertisement
2.13.3 User Management
Figure 2-19 User Management screen
EAR99 Technology Technology Subject to Restrictions Contained on the Cover Page
zero. Before the final minute elapsed, more compound was
detected, causing the system to extend the run for a final five
minutes at the minimum %B.
Enable rapid equilibration – Select this option to equilibrate
the column at a higher flow rate.
Note
Due to the high pressure that is possible during rapid equilibra-
tion, this option may not be desirable for some column media
or purification methods.
Enable Automatic Peak Hold – Inserts an isocratic hold for
the duration of each detected peak.
Use ELSD by Default – causes all runs after system boot up to
use the ELSD detector unless disabled in the run requirement
screen. After an initial separation, each subsequent separation
uses the same ELSD selection unless changed during the R
R
screen.
EQUIREMENTS
The User Management window to creates individual user
accounts on the system. Password access can be added if desired.
When configured, the user's preferences are stored and their
data is automatically saved to the user's personal folder on the
system.
To implement control over system usage, a system administrator
can set varying levels of access for each user. The capabilities of
each user's R
are summarized in the chart below (Figure
OLE
2-20).
User Management allows each user of the system to have cus-
tomized settings.
CombiFlash NextGen Systems
Section 2 Preparation
UN
2-21
Advertisement
Table of Contents
