Teledyne CombiFlash NextGen Installation And Operation Manual page 3

Table of Contents

Advertisement

CombiFlash NextGen
Installation and Operation Guide
Safety Warnings
Safety
EAR99 Technology Technology Subject to Restrictions Contained on the Cover Page
CombiFlash NextGen Installation and Operation Guide
Before installing, operating, or maintaining this equipment, all
hazards and preventive measures must be fully understood.
Refer to Section1.6 Safety in this Operation Guide for general
warnings about safety that pertain to the CombiFlash NextGen
system.
While specific hazards may vary according to location and appli-
cation, heed the following general warning:
Avoid hazardous practices! If you use this instrument in
any way not specified in this manual, the protection
provided by the instrument may be impaired; this may
increase your risk of injury.
You are urged to read and follow the general warnings contained
in the CombiFlash NextGen Important Information document
(P/N 69-5253-086). This document is shipped with your
CombiFlash NextGen system and can be downloaded from
https://www.teledyneisco.com/chromatography/combiflash.
Potential hazards covered by the CombiFlash NextGen
Important Information document include, but are not limited to:
• Chemical. Chemicals used with the CombiFlash
NextGen system may be classified as carcinogenic,
bio-hazardous, flammable, or radioactive.
• Laboratory. Chemical vapors may be flammable or
otherwise hazardous.
• Equipment. Use of the CombiFlash NextGen
instrument in any way not specified in the manual, may
impair the protection provided by the instrument.
• Electrical. Spark sources and static electricity pose a
potential hazard.
In all cases, use good laboratory practices and standard safety
procedures, and follow all applicable regulations.
Safety Warnings
WARNING
WARNING
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Combiflash nextgen 100Combiflash nextgen 300

Table of Contents