Safety Instructions - Schenck process Disomat Opus Operating Manual

Safety Instructions

2 Safety Instructions
To avoid personal injury and equipment damage, follow the safety regulations stated
below.
Additionally, you should observe:
•
Safety hints given in order-specific documentation
•
Safety hints relating to mechanical components
•
Instructions given in sub-suppliers documentation.
When performing installation, commissioning and service work, observe all applicable
local regulations.
Use As Originally Intended
The measuring system and its connected mechanical components are exclusively
designed for weighing and controlling tasks. Any use other than originally intended is
considered inappropriate.
Risks
No danger originates from the measuring system itself, if it is properly installed and
commissioned.
However, upon use of the measuring system, danger may result during transit of
material to be weighed (e.g. from auxiliaries used to handle or feed material) or if
system assumes control tasks. Residual risks may originate from the measuring
system if unskilled operators improperly handle the system.
The measuring system can be part of a more complex plant. The user is fully
responsible for the overall plant safety.
Identification of Residual Risks
The presence of this symbol indicates that the machine or component
used has the potential to cause damage to the measuring system or other
plant sections.
The presence of this symbol indicates that the machine or component used
has the potential to cause severe injury or death.
Personnel
Preparation, installation, commissioning, operation, maintenance, and servicing may
exclusively be performed by skilled persons only.
All persons working on the measuring system are required to observe the safety hints
and know the parts of the technical documentation relevant to their work.
The supervisor is responsible for instructing his operators to observe all regulations
and instructions given.
®
DISOMAT Opus – Operating Manual
© Schenck Process GmbH, Darmstadt
How To Use Manual
0630 BV-H2313 GB
- 3 -