Operating Input/Output Dialogs - Schenck process Disomat Opus Operating Manual

DISOMAT Overview

3.5.2.1 Operating Input/Output Dialogs

For you to easily recognize the kind of re
fo llow certain conventions.
Outputs
T hese are functions displaying current parameter values.
If the actual contents (e.g. '123
function is an output function.
The re re various types of output: a
•
Wit h single-part outputs, only one value is output:
Value is permanently displayed; exit function with [OK] key.
o
Value is displayed for so
o
automatically
(e.g. 'a:Display Gross')
•
With mu lti-part outputs, multiple va
Values are permanently di
o
exit function with [OK] key
(e.g. '6:Display Balance')
Value is displayed for some
o
automatically
(e.g. '52:Display Version')
You can use the [LEFT arrow] and [RIGHT arrow] to scroll in long
o
texts; there are some
where you can also scroll over several lines with [UP arrow] and
[DOWN arrow].
Inputs
These are functions used to enter data in the dialog mode.
You can identify an input mode from the
displayed after an instruction t
('underline') can be seen in the input space.
The re re two types of input: a
•
Input using scroll field (input by selection):
The cursor is fixed at the first point of the input space. Select from list of
eligible values using the [LEFT arrow] and [RIGHT arrow] ke :
®
DISOMAT Opus – Operating Manual
© Schenck Process GmbH, Darmstadt
action required for system operation, dialogs
4,56') is displayed after the note (e.g. 'Balance'), the
me seconds; function terminates
lues are output one after the other.
splayed; go to next value with [ENTER] key;
seconds; function terminates
special cases (such as displaying the version)
fact that the current value (su
ext (such as 'Fixed tare' or 'Tare') and a cursor symbol
General Control
er
ch as 'Fix 1') is
ys
0630 BV-H2313 GB
- 21 -