Setting Using Parameter Password - Schenck process Disomat Opus Operating Manual

Setting Mode
Input field
45:Change Password
Password: ______
opens. Enter current password and acknowledge with [ENTER] key.
Input field
45:Change Password
New Password: ______
opens. Enter new password and acknowledge with [ENTER] key.
Input field
45:Change Password
Repeat Password: ______
opens. Enter new password for the second time.
Acknowledge with [ENTER] key, and display confirms input.
45:Change Password
Password Accepted | Wrong

5.2 Setting Using Parameter Password

After input of Parameter password, you can access
•
'basic functionality' (see Item 4.2)
•
additional functions described below (see: Table, Fig.)
Menu Items
42:FUNCTION VARIANT
421:Parameter
46:PRINT FORM
461:Form texts
462:Form formats
463:Page header format
464:String name
465:EDP format
466:L-F-T mem. format
467:Reset cons. no.
468:Load default form
469:Load default text
47:MATERIALS
471:Balances
472:Clear balance
473:Material data
48:Fixed Tare Input
5a:DIAGNOSIS
5c: Activate Disoplan interface See Item 5.2.4.
BV-H2313 GB 0630
- 44 -
Setting Using Parameter Password
Comments
See Item 5.3 'Setting Using Configuration
Password')
Settings for printed output of weigh data.
Enter basic material data (balance settings).
Enter or change fixed tare values.
See BV-H2280
DISOMAT
© Schenck Process GmbH, Darmstadt
®
Opus – Operating Manual