Fct. 9:Contrast; Fct. A:display Gross - Schenck process Disomat Opus Operating Manual

Normal Mode
Example:
You wish to acquire the weight of a bulk solid (NET weight) stored in a drum. Drum
weight (TARE weight) is n
TARE weight in manual.
A dvantage: You need not weigh empty drum before filling.

4.2.8 Fct. 9:Contrast

Display contrast can be
Operating Seq uence
9:Contrast
After calling up the function, the following instruction appears:
<- OK ENTER ->
It shows what keys you can use to change contrast:
<- OK
decrease store settings
You can match contrast with the direction keys and you can store settings with the
[OK] or [ENTER] button. If there is not any change for a certain period of tim
o ut), it stores the present settings and the function is automatically ended.

4.2.9 Fct. a:Display gross

Use function for brief display of current GROSS weig
Pr erequisite: Display currently shows NET weight.
Operating Sequence
a :Display Gross
Right after operation of [EN
a rea) for some seconds.
E xample:
You have filled a hopper; scale is tared and shows weight of good to be weighed
(=NET). You wish to briefly display totals weight (=GROSS) with no need to clear tare
memory. This function
N ET weight display.
BV-H2313 GB 0630
- 38 -
oted on drum. Weigh filled drum (GROSS weight) and enter
easily matched to ambient brightness if needed for lighting.
ENTER ->
increase
TER] key, current GROSS weight is displayed (in weight
briefly outputs current GROSS weight before scale returns to
Functionality in Menu Tree
ht.
®
DISOMAT Opus – Operating Manual
© Schenck Process GmbH, Darmstadt
e (time-