Schenck process Disomat Opus Operating Manual page 130

Function Variants
Single Weighing
Follow these steps:
•
Insert new weigh slip into printer.
•
Identify vehicle.
•
Preset empty weight.
•
Release weighing operation.
•
Print weigh data.
If vehicle is unloaded, perform single weighing on incoming vehicle; if not, on outgoing
vehicle.
Home position, ZEUS display field
G 12.50 t
Follow these steps:
Press key F3 (perform single weighing)
Identify Vehicle
System prompts for input o
Example:
VehNo: 345 XYZ
(Max. 10 digits)
Acknowledge.
Identify Load (material number and type)
System prompts for material selection. Material number can be used to form
cumula tive total (weighing results of stored materials, numbers 10 to 25, are
summa ted) and printed on weigh slip.
Mat.:0
(Numbers 0...25 or -1)
Material na mes are assigned to numbers 1 to 25. For details, please see Further
functions .
Exampl e:
Mat.:3
Materials not stored can be designated direct by input of material number -1.
Mat.:-1
Acknowledge suggestion (0 = no material type indicated) or overwrite.
After input of -1, system prompts for input of material name to be printed on
weigh slip.
Text: ________
(Max. 12 digits)
BV-H2313 GB 0630
- 124 -
f vehicle number (truck or wagon number).
DISOMAT
© Schenck Process GmbH, Darmstadt
Weighbridge ZEUS
®
Opus – Operating Manual