Further Functions - Schenck process Disomat Opus Operating Manual

Function Variants
ZEUS is ready to acquire empty weight. Display reads
Contin: Weigh
known from First/Second/Single Weighing.
Acknowledge input.
ZEUS stores empty weight in a free memory and assigns a memory number
41 and 65. Assigned memory number is displayed for two seconds.
Example:
Memory No.: 41
Empty weight acquisition is complete.
Once empty weight has been stored in fixed tare memory:
Perform single weighing with or without totalization after lo
Proceed as described at Second Weighing item. ZEUS assigns memory numbers 41
to 65 to known vehicles.
System prompts for input of material number in any case. Proceed
First Weighing item.

6.6.7 Further Functions

Set to zero with ZeroSet key'
Zero settings can be effected only if scale is unloaded ( -1%...+3% of rated capacity).
Files
The data acquired by ZEUS are internally stored fail-safe in files.
The First Weighings File contains the data of all vehicles in plant (maximum 40)
expecte d for second wei
The Fixed Tare File contains the data of all vehicles (maximum 25) of your car pool or
of r egu ar custome l rs.
The Materials File contains all materials to be accumulated. This function facilitates
material indication in case of weighings whe
can be called up via material number.
You r c mmissioning e o
you desire so. You can select:
•
Show data
•
Clear data
•
Print file
In Fixed Tare file you can additionally
•
Create data
as described at Weighing Using Fixed Tare Weight item.
BV-H2313 GB 0630
- 126 -
to set scale to zero.
ghing.
re the 25 possible inputs in materials file
ngineer will explain to you how to access and edit these files, if
Weighbridge ZEUS
ading/unloading.
as described at
®
DISOMAT Opus – Operating Manual
© Schenck Process GmbH, Darmstadt
between