Data Input/Output - Schenck process Disomat Opus Operating Manual

DISOMAT Overview
Ad 3.
Start selected function:
[ENTER] key:
Start function
Once you have started function, number and name of its menu appear in the upper
dialog line.
In the lower dialog line, a note is displayed on the left (e.g. 'Fixed Tare') right next to
the input/output field. (Enter e.g. Fixed1).
Wherever a menu tree function is described in the following chapters of
manual, it is assumed that the function has been started as described above.
Ad 4.
For sequ ences and special features of dialog control and data input, see item to
fo llow.
Ad 5. and 6.
Exit function using the following keys:
+
Upon exit of function, DISOMAT returns to its state before call,
m enu tree, can restart selected function or select a new one.
Ad 7.
To return to 'Home Position' (Weight Display) operating state, press key [UP arro
many times as required, or go to home position direct by using key
[S HIFT]+[UP arrow]. Entered password, if any, is no longer valid.

3.5.2 Data Input/Output

In addition to basic weighing functions and functions with direct effect (e.g.
'35:'PrintRep eat'), system operation is realized using inputs and outputs in the
display.
•
You can either display the weight alone or alternately with various system
information in the 'Home Position' operating state (refer to Section 4.1.5).
•
In 'Menu Tree' operating state, you use the functions responsible for data
output (e .g. 'a:Display Gross) or prompting for data input (e.g. '8:Manual Tare
Input).
After start of a system function, operation continues in the dialog mode. These simple,
recurring sequences are
and control block keys.
BV-H2313 GB 0630
- 20 -
[OK] key:
With output function: Exit function.
With input function: Exit function and acquire inputs.
[ABORT] key:
With output function: Abort function.
With input function: Abort function and reject inputs.
explained hereafter. For this kind of interaction, use the input
i.e. you are still in
combination
®
DISOMAT Opus – Operating Manual
© Schenck Process GmbH, Darmstadt
General Control
w] as