Fct. 465:Edp Format; Fct. 466:Legal-For-Trade Memory Format - Schenck process Disomat Opus Operating Manual

Setting Mode

5.2.1.5 Fct. 465:EDP Format

Use menu item to determine the weigh data to be transferred to user's EDP system.
The string format consists of a fixed and a variable component. Format variable part
using this function. Use the symbolic names used for form formatting. However,
separate single format variables by '#' or a blank.
For so-called fixed format codes, see 'Data Communication Manual'
(BVH2316) item 'EDV Commands' -> "DR" command.
ATTENTION: Reset so-called variable format codes to default values
using function '468:Load Default Form'.
Operating Sequence
The input field shows the format string currently stored, e.g.
465:EDP Format
EDP Format D4,#,U,#,LN,#,NE
If need be, change format and acknowledge with [ENTER] key.
Example:
If you use the above EDP format, string is output in the following format:
01#DR#1#0#C0#2000-01-11#10:58#17#123,45kg Net
¦-- Fixed ---¦---------- Variable ------------¦

5.2.1.6 Fct. 466:Legal-For-Trade Memory Format

The legal-for-trade memory format determines the information per input to be stored in
legal-for-trade memory. The format consists of a fixed and a variable part.
The fixed element comprises:
•
Date
•
Time
•
Consecutive number
•
Gross
•
Net
•
Tare
•
Scale status (4 digits)
Use function to determine the variable elements thus defining the additional
information to be stored per input. To do so, use the rules and codes for form
formatting (see '462:Form Formats').
®
DISOMAT Opus – Operating Manual
© Schenck Process GmbH, Darmstadt
Setting Using Parameter Password
0630 BV-H2313 GB
- 53 -