Schenck process Disomat Opus Operating Manual page 128

Function Variants
Materials not stored can be designated direct by input of material number -1.
Mat:-1
Acknowledge suggested value (0 = no material input) or overwrite.
After input of -1, system prompts for input of material name to be printed on weigh slip.
Text : _________
(Max. 20 digits)
Acknowledge input.
Keep in mind vehicle number displayed for two seconds. If not, you have to enter
complete vehicle number again at the time of second weighing.
Memory No.:17
ZEUS ca n assign up to 99 memory numbers, i.e. maximum 99 vehicles with first and
second weights can be stored.
Release Weighing Operation
System prompts for release of weighing operation.
Select using arrow keys.
Contin: Weigh
Contin: Abort
Contin: Weight
Acknowledge selection.
After
Contin: Weigh
ZEUS start s printing (remember to put new weigh slip into printer), returns to home
positio n and is ready to start next weighing operation.
After
Contin: Abort
all dat a entered are delected. ZEUS returns to home position and is ready to start next
weigh ing operation.
After
Contin: Weight
ZE US shows the scale weight temporarily and then returns to selection.
BV-H2313 GB 0630
- 122 -
Weighbridge ZEUS
®
DISOMAT Opus – Operating Manual
© Schenck Process GmbH, Darmstadt