Schenck process Disomat Opus Operating Manual page 129

Function Variants
Second Weighing
Vehicle has been loaded, or unloaded. To complete weight acquisition, follow these
steps:
Press F2 key (perform second weighing)
System prompts for input of memory number assigned to vehicle at the time of first
weighing.
Memory No.:0
a) You remember the number:
Overwrite by memory number.
Sample display:
Memory No:17
Display shows relevant vehicle number, for you to check.
VehNo: 345 XYZ
Correct, if need be, and acknowledge.
b) You do not remember the memory number:
Acknowledg e default value (memory no. 0)
System prom pts for ne
VehNo: 345 XYZ
(Max. 10 digits)
Ack nowledge input.
ZEUS rep orts "Ready".
Con tin Weigh :
Contin: Weight
But note:
•
If no first weighing has been performed yet, ZEUS returns to home posit
•
If material number has no
now (see First Weighing
Insert weigh slip into printer and press key to acknowledge. First/second
weig hing operation is complete.
®
DISOMAT Opus – Operating Manual
© Schenck Process GmbH, Darmstadt
w input of vehicle number.
t been entered upon first weighing, you can do it
, Identify Load).
Weighbridge ZEUS
ion.
0630 BV-H2313 GB
- 123 -