Standard Operating Sequence - Schenck process Disomat Opus Operating Manual

Function Variants

6.5.4 Standard Operating Sequence

This item reflects a typical operating sequence of a cargo scale.
GROSS/NET Weighing With Unknown Tare Weight
Action
1. DISOMAT must be in
home position!
Set display type: 'NET'
2. Put pallet (TARE weight)
on scale and store tare.
3. Put good to be weighed
on pallet.
4. If required, enter string.
5. Prepare weigh report
6. Clear tare memory
Alte at rn ively, you can also
•
perform a mere GROSS weighing. 'Acquire Tare' and 'Clear Tare' functions
are omitted.
•
key in a known hopper or pallet dead weight. Use 'Enter Tare In Manual'
function ( [F1] key) in place of 'Acquire Tare'.
•
call up the known hopper or pallet dead weight from the list of stored tare
values. Use the "Select Tare from List" function ( [F3] key) in place of 'Acquire
Tare'.
BV-H2313 GB 0630
- 116 -
Display (e.g.) Key(s); Comments
G 0.0 kg If scale display does not read zero:
-> 'Zero Scale' key
G 103.5 kg
Net T 0.0 kg Scale is tared.
Net T 205.0 kg Scale displays NET weight.
'Enter String' key.
do.
Acknowledge with key
do.
Print weigh report
do.
do.
G 308.5 kg Weighing is complete. Remove
good to be weighed from scale.
Scale is ready for next weighing
operation.
DISOMAT
© Schenck Process GmbH, Darmstadt
Cargo Scale
'Acquire Tare' key
+
®
Opus – Operating Manual