Using Talksets
Talkset Controls
The 2-Way Talkset Kit (N2605A-137) allows operators at opposite ends of
a copper cable run to coordinate their efforts. The Talkset Kit is included
in the WireScope 350 Professional Test Kit, or can be ordered separately.
1RWH
UurÃhyxrÃqÃÃ
xÃvuÃvphyÃsvir
Ãphiyvt
To use talksets for communicating between the ends of a cable run:
1 Insert a talkset's plug into the talkset jack on the WireScope, and the
plug of another talkset into the jack of the DualRemote. See Talkset
jack, on page 1-3, for the jack's location.
2 Connect the WireScope's and DualRemote's SmartProbes to the ends
of a cable run.
3 Speak and listen as with any telephone headset.
1RWH
XurÃhÃrÃvÃ
vtÃhyxrÃpvphvÃvÃqvhiyrqÃXhvÃvyÃurÃrÃsvvurÃ
irs
rÃrhxvt
The WireScope talksets have two controls:
Hvp
urÃrÃvpu
• The thumbwheel in the inside curve of the control housing
controls the earpiece volume.
• The switch on the outside curve of the control housing switches
the microphone off.
@h
urÃyr
VvtÃXv
rTpr
VvtÃU hyxr
2−5