Agilent Technologies WireScope 350 User Manual page 59

8r…‡vs’vtÃ8‚ƒƒr…Ã8hiyvt
Tr‡‡vtÃVƒÃhÃ6ˆ‡‚‡r†‡
3−12
To configure the hierarchical labeling format:
1 Press a category to check it for inclusion in the label, or to uncheck it
so it does not appear. When all the desired categories are checked,
press Next. The Site Setup screen changes to show the selected
categories.
2 If you want the numbers for any field to increase automatically with
each new label and test, press the category, then press Enable
Auto-Increment so that a checkmark appears, as in the figure
above.
3 To set the beginning number for a field to other than 1, press the
category name, then press the Enter Start Value field. The onscreen
keyboard opens.
4 Press the backspace arrow to erase the number in the display, then
press the number or letter keys to enter the new starting value. Press
OK. The keyboard closes, and the new starting value appears in the
Enter Start Value field.