Agilent Technologies WireScope 350 User Manual page 57

8r…‡vs’vtÃ8‚ƒƒr…Ã8hiyvt
Tr‡‡vtÃVƒÃhÃ6ˆ‡‚‡r†‡
3−10
Auto-Increment settings for the field highlighted, and the start and
end values for the field highlighted.
2 If you want the numbers for any field to increase automatically with
each new label and test, highlight that field, then press Enable
Auto-Increment so that a checkmark appears, as in the figure
above.
3 To set the beginning number for a field to other than 1, highlight the
category name, then press the Enter Start Value field. The onscreen
keyboard opens.
4 Press the backspace arrow to erase the number in the display, then
press the number or letter keys to enter the new starting value. Press
OK. The keyboard closes, and the new starting value appears in the
Enter Start Value field.