The Expert Autotest Setup; Choosing An Existing Settings Profile - Agilent Technologies WireScope 350 User Manual

@‘ƒr…‡ÃH‚qrÃs‚…Ã8‚ƒƒr…ÃUr†‡vt
UurÃ@‘ƒr…‡Ã6ˆ‡‚‡r†‡ÃTr‡ˆƒ

The Expert Autotest Setup

.

Choosing an Existing Settings Profile

6−4
When in the Expert Mode, additional Autotest setup choices are
available.
A profile is a predefined locked set of Autotest settings, locked to
prevent the user from changing them. Default settings profiles exist for
Cat 5, Cat 5E, Cat 6, Class D, and Class E. Previously defined settings
profiles are added to the list of default profiles. To select an existing
settings profile:
1 In Expert Mode, press Autotest on the Main Menu.
2 In the Autotest Setup screen, press Select Settings Profile.
3 In the Profile Setup screen, press the desired profile. If the scroll bar
is not full length, use the scroll rocker to scroll down to see more
stored profiles