8r
vsvtÃAvir
Ã8hiyvt
TrvtÃVÃhÃ6r
Entering the Operator Names
4−20
the stored descriptions matches the connector being tested, select it,
then press OK.
2 If not, highlight Add New Description, and press Next.
3 Enter the name to be added to the database and press Next.
4 Select the fiber connector type from the list of mono-fiber connectors
and multi-fiber connectors shown or select Unspecified. Press OK
and Fiber Autotest Settings screen displays with the new connector
description beside the fiber connector icon.
The names of the technicians performing the tests can be entered, and
will appear on the test report.
To enter the test technicians' names:
1 On the Fiber Autotest Setup screen, press Operators, then Edit. The
Operator Setup screen displays.