Saving The Results - Agilent Technologies WireScope 350 User Manual

Th‰vtÃUr†‡ÃSr†ˆy‡†
Th‰vtÃU r†‡ÃSr†ˆy‡†
.

Saving the Results

5−4
2 On the System Settings screen, press Save To, then press Edit. The
Storage Setup screen displays.
3 Select either Internal Flash or CFlash Card.
4 If you chose Internal Flash, press OK. The System Settings screen
displays, with "Internal Flash" next to Save To.
5 If you chose CFlash Card, press Next. The Storage Setup screen
displays a message about preparing the CompactFlash™ card. The
Storage Setup screen displays a list of the steps in preparing the CF
card, and a progress bar.
6 When the progress bar shows 100%, press OK. The System Settings
screen displays, with "CFlash Card" next to Save To.
To save the test results for inclusion in certification reports: