Choosing The Labeling Format; Choosing The Cable Type - Agilent Technologies WireScope 350 User Manual

@‘ƒr…‡ÃH‚qrÃs‚…Ã8‚ƒƒr…ÃUr†‡vt
UurÃ@‘ƒr…‡Ã6ˆ‡‚‡r†‡ÃTr‡ˆƒ

Choosing the Labeling Format

Choosing the Cable Type

6−12
The labeling format for Expert Mode is the same as that previously
described in Chapter 3, Certifying Copper Cabling. See Choosing the
Labeling Format, on page 3-6 for more information.
Cable from different manufacturers has different transmission
characteristics. The WireScope 350 compensates for those differences if
you tell it what cable is used on the job. A grey cable spool icon indicates
UTP cabling, a black cable spool icon indicates shielded cabling.
1 On the Autotest Setup screen, press the cable spool icon, then press
Edit. The Cable Setup screen displays.
1RWH
UurÆp…‚yyÃih…ÇurÃ…vtu‡Ã‚sÇurÆp…rrÃ†u‚†Ã‡urÃy‚ph‡v‚Ã‚sÇurÃqh‡hÆu‚ÃhqÃv†Ã‚‡Ã
hÃsˆp‡v‚hyÆp…‚yyÃih…ÃU‚Æp…‚yyȆrÇurÆp…‚yyÃiˆ‡‡‚Ãh‡Ã‡urÃy‚r…Ã…vtu‡Ã‚sÇurÃ
Xv…rTp‚ƒr
2 Select the cable manufacturer, and press Next. The Cable Database
screen displays.
3 Select a cable on the list, and press OK. The Autotest Setup screen
displays, with the selected cable type next to the cable spool icon. If
the cable is not in the cable database, see Adding a new cable
type, on page 3-14.