Agilent Technologies WireScope 350 User Manual page 55

8r…‡vs’vtÃ8‚ƒƒr…Ã8hiyvt
Tr‡‡vtÃVƒÃhÃ6ˆ‡‚‡r†‡
3−8
2 To set the beginning number to other than 1, press the Enter Start
Value field. The onscreen keyboard opens.
3 Press the backspace arrow to erase the number in the display, then
press the number keys to enter the new starting number. Press OK.
The keyboard closes, and the new starting number appears in the
Enter Start Value field.
4 To set the number of cable runs to label and test, press the Enter
End Value field. The onscreen keyboard opens.
5 Press the backspace arrow to erase the number in the display, if any,
then press the number keys to enter the new number. Press OK. The
keyboard closes, and the new ending number appears in the Enter
End Value field.
6 Press OK. The Autotest Setup screen displays.