Agilent Technologies WireScope 350 User Manual page 86

1 On the Fiber Autotest Settings screen, press the connector icon, then
Edit. The Connector Setup screen displays.
2 Press Next. A list of that connector types displays.
3 Press the type of the connector, then press OK. The Fiber Autotest
Setup screen displays, with the selected connector type next to the
connector icon. If you do not see the connector on the list, see the
next section
Adding a new connector type
If you have a connector which is not in the connector database, you can
add a new connector description to the database.
1 If the manufacturer is not present, leave the manufacturer as
Unspecified. If the manufacturer is present on the list, select it, then
press Next. The Connector Setup screen is displayed. In either case,
you will be offered stored descriptions of connector types. If one of
8r…‡vs’vtÃAvir…Ã8hiyvt
Tr‡‡vtÃVƒÃhÃ6ˆ‡‚‡r†‡
4−19