@r
ÃHqrÃs
Ã8r
ÃUrvt
UurÃ@r
ÃU yÃHr
The Expert Tools Menu
6−18
The Expert mode Tools menu includes the following:
• Quick Check tests the continuity and length of a cable run. See
Running a Quick Check, on page 6-19.
• Certify Networks lets you choose standards for certification of
the network. See Certifying a Network, on page 6-20.
• Blink Port blinks the LED on a circuit at an Ethernet hub or
switch port. This helps locate the far end of a circuit. See Blinking
the Port, on page 6-21.
• Learn NVP allows the user to determine the NVP (Nominal
Velocity of Propagation) of a sample of cable. See Learning the
NVP of a Cable, on page 6-22.
• Measure Length measures the length of each pair of a cable
whose type is in the Cable Database. See Measuring the Cable
Length, on page 6-23.
To open the Tools menu:
1 Change to Expert mode (see page 6-3).
2 On the Main Menu, press Tools. The Tools Menu displays.