Entering The Site Name - Agilent Technologies WireScope 350 User Manual

Entering the Site Name

The site name identifies the group of settings used on a job, and can be
applied to test records for that site.
To enter the site name:
1 On the Autotest Setup screen, press Site, then press Edit. The Site
2 Press Create a New Site Name, then press Next. (The OK button
1RWH
U‚ÃpuhtrÇurÁh€rÂ…ÃyhiryvtÃs‚…€h‡Ãs‚…ÃhÃr‘v†‡vtÆv‡rÃ…r††Ã‡urÆv‡rÁh€rÇurÃ
yv†‡ÇurÃƒ…r††Ã@qv‡WvrÃhqÃIr‘‡
3 Press the icon under
4 Press the keyboard keys to enter the site name, then press OK. The
Setup screen displays.
changes to a Next button when you select Create a New Site
Name.) The screen changes, to allow naming the site.
@‡r…ÃIrÃTv‡rÃIh€r
keyboard closes.
@‘ƒr…‡ÃH‚qrÃs‚…Ã8‚ƒƒr…ÃUr†‡vt
UurÃ@‘ƒr…‡Ã6ˆ‡‚‡r†‡ÃTr‡ˆƒ
The onscreen keyboard opens.
6−11