Certifying A Network - Agilent Technologies WireScope 350 User Manual

@‘ƒr…‡ÃH‚qrÃs‚…Ã8‚ƒƒr…ÃUr†‡vt
UurÃ@‘ƒr…‡ÃU ‚‚y†ÃHrˆ

Certifying a Network

6−20
The Expert mode Tools menu includes Certify Network, which lets you
test a cable for conformance to different network standards.
To certify a network:
1 Connect the WireScope and DualRemote to the cable.
2 On the Expert mode Tools Menu (see page 6-18), press Certify
Network. The Certify Networks Setup screen displays.
3 Press a standard in the list to select it. A checkmark appears next to
each selected standard.
4 To test the network to the selected standards, press Start Test. The
test executes, and WireScope displays a Pass or Fail screen.
You can save and view details of the test results as with any test by
pressing Details. See Saving Test Results, on page 5-3, and Viewing
Result Details, on page 5-5.