Table of Contents
Advertisement
Tƒrpvsvph‡v‚†
Avir…ÃT€h…‡Q…‚ir
Fiber SmartProbe
General
Size
Optical Connectors
Power Source
Operating Temperature
Storage Temperature
Operating Humidity
Maximum Relative Humidity
Altitude
Detector
Receive Wavelengths
Measurement Accuracy
Dynamic Range
Detector Type
Transmitter
Power Output
Source Type
Center Wavelength
Spectral Bandwidth (RMS)
Stability
Stabilization Time
Cable Length
Accuracy (whichever is greater)
Resolution
1
Distance
Range
Propagation Delay
Accuracy (whichever is greater)
Resolution
Range
1
Assumes double-ended configuration with –15dB maximum multimode
link loss and 25dB maximum singlemode link loss. Divide by two for
single-ended configuration.
•
ST is a registered trademark of AT&T
9−6
+
FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm
2.4" x 1.6" x 0.8"
(6.0 cm x 4.0 cm x 2.5 cm)
ST® x 2
Draws power from WireScope 155 or
DualRemote 155 via intelligent test port interface
o
o
0
to 40
C
o
o
- 10
to 55
C
10 to 90% non-condensing
80% for temperatures up to 31 C, decreasing
linearly to 50% relative humidity at 40 C
Up to 2000 meters
FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm
850 and 1300nm
+/-0.2dB @ -20dBm
0 to –40 dBm
Germanium
FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm
(into 62.5/125 multimode fiber)
-10dBm (850nm), -15dBm (1300nm)
LED
N/A
N/A
FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm
+/- 4% or +/- 1.5 meters
+/- 1.5 meters
0 – 4 km for 3.75 dB/km @ 850nm
0 – 10 km for 1.50 dB/km @ 1300nm
FiberSmartProbe+850nm, Fiber SmartProbe+ 1300nm
+/- 4% or +/- 6 nanoseconds
+/- 6 nanoseconds
0 – 300 microseconds
Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm
2.4" x 1.6" x 0.8"
(6.0 cm x 4.0 cm x 2.5 cm)
SC x 2
Draws power from WireScope 155 or
DualRemote 155 via intelligent test port interface
o
o
0
to 40
C
o
o
- 10
to 55
C
10 to 90% non-condensing
80% for temperatures up to 31 C, decreasing
linearly to 50% relative humidity at 40 C
Up to 2000 meters
Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm
1310nm and 1550nm
+/-0.2dB @ -20dBm
0 to –40 dBm
Germanium
Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm
(into 9/125 singlemode fiber)
-3 dBm (1310nm and 1550nm)
Stabilized Class 1 LASER
with EN 60825.1 and FDA 21 CFR 1040.10.
1310nm +/- 30nm, 1550nm +/- 30nm
< 5nm
+/- 0.1dB, 1Hr. @ 25 C
< 5 min.
Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm
+/- 4% or +/- 1.5 meters
+/- 1.5 meters
0 – 50 km for 0.5dB/km @ 1310nm and 1550nm
Fiber SmartProbe+ 1310nm, Fiber SmartProbe+ 1550nm
+/- 4% or +/- 6 nanoseconds
+/- 6 nanoseconds
0 – 300 microseconds
2
For safety the transmitter should never be viewed directly with the naked eye, a lens, or
magnifying device.
KLASSE 1 LASER PRODUKT
2
product in accordance
Advertisement
Table of Contents
