Installing An Ac Power Supply - HPE ProLiant DL325 Gen10 Plus v2 User Manual

Installing an AC power supply

Installing an AC power supply
WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or WARNING:
power supply blank to cool before touching it.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated CAUTION:
with either a component or a blank.
Prerequisites Prerequisites
Before installing a power supply option, review the Power supply warnings and cautions .
Procedure Procedure
1. If installed, release the cable management arm and then swing the arm away from the rack.
2. If you are installing a power supply in the power supply bay 2, remove the power supply blank.
Retain the blank for future use.
3. Immediately slide the power supply into the bay until it clicks into place.
Installing an AC power supply 90