HPE ProLiant DL325 Gen10 Plus v2 User Manual page 5

4.13 Storage controller options
4.13.1 Preparing the server for storage controller installation
4.13.2 Installing a type-a modular controller option
4.13.3 Installing a type-p PCIe plug-in controller option
4.14 Energy pack options
4.14.1 HPE Smart Storage Battery
4.14.2 Energy pack specifications
4.14.3 Installing an energy pack
4.15 Expansion card options
4.15.1 Installing an expansion card
4.16 M.2 SSD options
4.16.1 Installing the M.2 SATA SSD enablement option
4.16.2 HPE NS204i-p NVMe OS Boot Device option
4.16.2.1 Installing the HPE NS204i-p NVMe OS Boot Device option
4.17 OCP NIC 3.0 adapter option
4.17.1 Installing an OCP NIC 3.0 adapter
4.18 Chassis intrusion detection switch option
4.18.1 Installing the chassis intrusion detection switch
4.19 Serial port option
4.19.1 Installing the serial port option
4.20 Internal USB device option
4.20.1 Installing an internal USB device
4.21 HPE Trusted Platform Module 2.0 Gen10 Plus option
4.21.1 HPE Trusted Platform Module 2.0 guidelines
4.21.2 Installing the Trusted Platform Module board
4.21.2.1 Preparing the server for installation
4.21.2.2 Installing the TPM board and cover
4.21.2.3 Preparing the server for operation
4.21.3 Enabling the Trusted Platform Module
4.21.3.1 Enabling the Trusted Platform Module as TPM 2.0
4.21.3.2 Enabling the Trusted Platform Module as TPM 1.2
4.21.4 Retaining the BitLocker recovery key/password
5 Cabling
5.1 Cabling guidelines
5.2 Internal cabling management
5.3 Storage cabling
5.3.1 Drive power cabling
5.3.2 Storage controller cabling
5.3.2.1 4 LFF SAS/SATA drive controller cabling
5.3.2.2 8 SFF SAS/SATA drive controller cabling
5.3.2.3 8 SFF NVMe drive controller cabling
5.3.2.4 2 SFF NVMe drive controller cabling
5.3.2.5 8 + 2 SFF drive controller cabling
5.3.3 Energy pack cabling