18. Connect the optical drive-M.2 SSD SATA splitter cable to the system board .
19. If the SSD connectors of the splitter cable will not be used, secure them in the cable clip.
20. Install the front drive cage .
21. Install the fan wall brackets.
22. Install the access panel .
23. Install the rack sliding rails .
24. Install the server into the rack .
25. Connect all peripheral cables to the server.
26. Connect each power cord to the server.
27. Connect each power cord to the power source.
28. If installed, close the cable management arm.
Installing an optical drive in the SFF drive chassis
120