HPE ProLiant DL325 Gen10 Plus v2 User Manual page 185

20. Power up the server .
21. If removed, install the front bezel .
22. To configure the serial port setting:
a. From the boot screen, press F9 F9 to access the UEFI System Utilities.
b. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Serial
Port Options > Embedded Serial Port.
c. Select a setting.
d. Press F12 F12 key to save your selection.
e. Click Yes-Save Changes.
f. Click Reboot.
The installation is complete.
Installing the serial port option 185