Storage Controller Options - HPE ProLiant DL325 Gen10 Plus v2 User Manual

Storage controller options

Storage controller options
This server supports the following storage controllers:
Embedded HPE SR100i Gen10 Plus Software RAID controller:
Supports direct attached SATA and NVMe drives.
Software RAID is supported in specific drive bays. To identify these drive bays, see Drive bay numbering.
Supports SATA and NVMe software RAID.
For more information on software RAID configuration, see the HPE SR Gen10 Plus Software RAID User Guide at
https://www.hpe.com/support/SSC-SRGen10Plus-ug. https://www.hpe.com/support/SSC-SRGen10Plus-ug
Type-a modular (AROC) and type-p PCIe plug-in Gen10 and Gen10 Plus storage controller options:
Supports NVMe, SAS, and SATA drives.
Supports hardware RAID.
When a Gen10 Plus tri-mode controller is used together with a U.3 drive backplane, the system will support mixed drive
configuration.
Storage controller options 143