Installing An Optical Drive In The Lff Drive Chassis - HPE ProLiant DL325 Gen10 Plus v2 User Manual

Installing an optical drive in the LFF drive chassis

Installing an optical drive in the LFF drive chassis
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-10 Torx screwdriver
Phillips No. 1 screwdriver
Procedure Procedure
1. If installed, remove the front bezel .
2. Power down the server.
3. If installed, release the cable management arm.
4. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
5. Disconnect all peripheral cables from the server.
6. Remove the server from the rack .
7. Place the server on a flat, level work surface.
8. Remove the rack sliding rails.
9. Remove the access panel .
10. Remove the right fan wall bracket.
Installing an optical drive in the LFF drive chassis 112