HPE ProLiant DL325 Gen10 Plus v2 User Manual page 200

Enabling the Trusted Platform Module as TPM 1.2 Enabling the Trusted Platform Module as TPM 1.2
Procedure Procedure
1. From the boot screen, press F9 F9 to access the UEFI System Utilities.
2. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Trusted
Platform Module options.
3. Change the TPM Mode Switch Operation to TPM 1.2.
4. Verify that "TPM Visibility" is set to Visible.
5. Press F10 F10 to save your selection.
6. When prompted to save the change in System Utilities, do one of the following:
If in graphical mode, click Yes.
If in text mode, press the Y Y key.
7. Press Esc Esc to exit System Utilities.
The server reboots a second time without user input. During this reboot, the TPM setting becomes effective.
8. Enable TPM functionality in the OS, such as Microsoft Windows BitLocker or measured boot.
For more information, see the Microsoft website Microsoft website .
Enabling the Trusted Platform Module as TPM 1.2 200