HPE ProLiant DL325 Gen10 Plus v2 User Manual page 12

Item Item Description Description
2 NIC status LED
3 Health LED
4 Power On/Standby button and system
power LED
1
When all LEDs flash simultaneously, a power fault has occurred. For more information, see Front panel LED power fault codes.
2
If the health LED indicates a degraded or critical state, review the system Integrated Management Log (IML) or use HPE iLO to
review the system health status.
3
Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the
front I/O cable is disconnected.
Status Status
Flashing blue
Off
1
Solid green
Flashing green
Off
1
Solid green
Flashing green
Flashing amber
Flashing red
Solid green
1
Flashing green
Solid amber
Off
Definition Definition
1 flash per second = Remote
management or firmware upgrade
in progress
4 flashes per second = iLO manual
reboot sequence initiated
8 flashes per second = iLO manual
reboot sequence in progress
Deactivated
Linked to network
Network active
No network activity
Normal
iLO is rebooting
2
System degraded
2
System critical
System on
Performing power-on sequence
System in standby
3
No power present
Front panel LEDs and buttons 12