Installing The Hpe Ns204I-P Nvme Os Boot Device Option - HPE ProLiant DL325 Gen10 Plus v2 User Manual

Installing the HPE Installing the HPE NS204i-p NVMe OS Boot Device NS204i-p NVMe OS Boot Device option
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots have either CAUTION:
a riser slot blank or an expansion card installed.
Prerequisites Prerequisites
Before beginning installation, make sure that the server is updated with the latest operating system firmware and drivers.
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure Procedure
Installing drives onto the boot device Installing drives onto the boot device
1. Remove the liner from the thermal interface pad.
2. Install the drives.
Installing the boot device Installing the boot device
option

Installing the HPE NS204i-p NVMe OS Boot Device option

169