Install The Front Drive Cage - HPE ProLiant DL325 Gen10 Plus v2 User Manual

Install the front drive cage

Install the front drive cage
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure Procedure
1. If the following cables were disconnected, connect them to the drive backplane:
Drive power cable
Storage controller cable
2. Position the drive cage (callout 1) and route the cables through the foams on both sides of the fan wall (callout 2).
3. Slide the drive cage to engage with the spools on the base pan of the chassis.
LFF drive cage
Install the front drive cage 60