21. If installed, close the cable management arm.
22. Power up the server .
23. If removed, install the front bezel .
24. To configure drive arrays, see the following documentation for detailed instructions:
HPE SR Gen10 Plus Software RAID User Guide at https://www.hpe.com/support/SSC-SRGen10Plus-ug
HPE SR Gen10 Plus Controller User Guide at https://www.hpe.com/info/SR-Gen10Plus-UG
HPE MR Gen10 Plus Controller User Guide at https://www.hpe.com/info/MR-Gen10Plus-UG
The installation is complete.
https://www.hpe.com/support/SSC-SRGen10Plus-ug
https://www.hpe.com/info/SR-Gen10Plus-UG
https://www.hpe.com/info/MR-Gen10Plus-UG
Installing a type-p PCIe plug-in controller option
151