Install The Server Into The Rack - HPE ProLiant DL325 Gen10 Plus v2 User Manual

Install the server into the rack

Install the server into the rack
Prerequisites Prerequisites
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
Before you perform this procedure, make sure that you have a T-25 Torx screwdriver available.
Procedure Procedure
1. Install the server into the rack:
a. Insert the sliding rails into the mounting rails (callout 1).
b. Slide the server until the chassis ears are flushed against the columns (callout 2).
c. Open the chassis ears (callout 1), and then tighten the shipping screws (callout 2).
Install the server into the rack 65