HPE Trusted Platform Module 2.0 Gen10 Plus option
HPE Trusted Platform Module 2.0 Gen10 Plus option
Use these instructions to install and enable the HPE TPM 2.0 Gen10 Plus Kit. This procedure includes three sections:
1. Installing the Trusted Platform Module board
2. Enabling the Trusted Platform Module
3. Retaining the recovery key/password
HPE TPM 2.0 installation is supported with specific operating system support such as Microsoft Windows Server 2012 R2 and later. For
more information about operating system support, see the product QuickSpecs on the Hewlett Packard Enterprise website
(https://www.hpe.com/info/qs
https://www.hpe.com/info/qs). For more information about Microsoft Windows BitLocker Drive Encryption feature, see the Microsoft
website (https://www.microsoft.com
https://www.microsoft.com).
CAUTION: If the TPM is removed from the original server and powered up on a different server, data stored in the TPM
CAUTION:
including keys will be erased.
IMPORTANT: In UEFI Boot Mode, the HPE Trusted Platform Module 2.0 Gen10 Plus can be configured to operate as
IMPORTANT:
TPM 2.0 (default) or TPM 1.2 on a supported server. In Legacy Boot Mode, the configuration can be changed between
TPM 1.2 and TPM 2.0, but only TPM 1.2 operation is supported.
HPE Trusted Platform Module 2.0 Gen10 Plus option
189