10. To install the storage controller in the primary riser, do the following:
a. Remove the primary riser cage.
b. Remove the riser slot blank.
c. Install the type-p storage controller.
Make sure that the controller is seated firmly in the slot.
Primary riser slot 1
Primary riser slot 2
d. Install the primary riser cage.
11. To install the storage controller in the secondary riser, do the following:
If you are installing a full-height controller in the secondary riser, make sure that the riser is equipped with the full-height retainer
bracket.
a. Remove the riser slot blank.
b. Install the type-p storage controller.
Half-height, half-length controller
Installing a type-p PCIe plug-in controller option
149