HPE ProLiant DL325 Gen10 Plus v2 User Manual page 48

10. Disconnect the following cables from their system board and controller connectors:
Drive power cable
Storage controller cable
Make sure to release the controller cables from the cable tie/clip securing them.
Front I/O cable
11. Remove the fan wall brackets.
12. Release the disconnected cables from the foams on both sides of the fan wall.
13. Remove the front drive cage:
a. Remove the drive cage screws (callout 1).
b. Slide the drive cage forward, and then lift it from the base pan of the chassis (callout 2).
LFF drive cage
Remove the front drive cage 48