Enabling The Trusted Platform Module As Tpm 2.0 - HPE ProLiant DL325 Gen10 Plus v2 User Manual

Enabling the Trusted Platform Module as TPM 2.0

Enabling the Trusted Platform Module as TPM 2.0
Procedure Procedure
1. From the boot screen, press F9 F9 to access the UEFI System Utilities.
2. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Trusted
Platform Module options.
3. Verify the following:
"Current TPM Type" is set to TPM 2.0.
"Current TPM State" is set to Present and Enabled.
"TPM Visibility" is set to Visible.
4. If changes were made in the previous step, press F10
5. If F10 F10 was pressed in the previous step, do one of the following:
If in graphical mode, click Yes.
If in text mode, press the Y Y key.
6. Press Esc Esc to exit System Utilities.
7. If changes were made and saved, the server prompts for reboot request. Press Enter
If the following actions were performed, the server reboots a second time without user input. During this reboot, the TPM setting
becomes effective.
Changing from TPM 1.2 and TPM 2.0
Changing TPM bus from FIFO to CRB
Enabling or disabling TPM
Clearing the TPM
8. Enable TPM functionality in the OS, such as Microsoft Windows BitLocker or measured boot.
For more information, see the Microsoft website
F10 to save your selection.
Microsoft website .
Enter to confirm reboot.
Enabling the Trusted Platform Module as TPM 2.0 199