Remove The Rack Sliding Rails - HPE ProLiant DL325 Gen10 Plus v2 User Manual

Remove the rack sliding rails

Remove the rack sliding rails
Procedure Procedure
1. If installed, remove the front bezel .
2. Power down the server.
3. If installed, release the cable management arm.
4. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
5. Disconnect all peripheral cables from the server.
6. Remove the server from the rack .
7. Place the server on a flat, level work surface.
8. Remove the rack sliding rails:
a. Pull and hold the release latch (callout 1).
b. Slide the rail towards the front panel and pull it from the server (callout 2).
Remove the rack sliding rails 43