Remove The Server From The Rack - HPE ProLiant DL380 Gen11 User Manual

Remove the server from the rack

Remove the server from the rack
Prerequisites Prerequisites
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
T-25 Torx screwdriver
About this task About this task
To remove the server from a Hewlett Packard Enterprise, Compaq-branded, Telco, or third-party rack:
Procedure Procedure
1. Power down the server.
2. Disconnect the rear cabling.
3. Extend the server from the rack .
4. Release the rail latches and remove the server from the rack.
HPE ProLiant DL380 Gen11 Server User Guide 39