Remove The System From The Rack - HPE Apollo 4200 Gen10 Maintenance And Service Manual

Extending front drive cages out of a chassis removed from a rack
Procedure
Pull down the front drive cage release latches and use them to extend the front and internal drive cages out of the chassis.

Remove the system from the rack

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power supplies, and internal system
components to cool before touching them.
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that:
• The rack is bolted to the floor using the concrete anchor kit.
• The leveling feet extend to the floor.
• The full weight of the rack rests on the leveling feet.
• The racks are coupled together in multiple rack installations.
• Only one component is extended at a time. If more than one component is extended, a rack might become unstable.
Procedure
1. Back up all system data.
2. Power down the system (Power down the system).
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the system.
4. Disconnect all peripheral cables from the system.
5. Remove the system from the rack:
Removal and replacement procedures
38